Using PC or Laptop as a HDMI Source
Send my PC VIDEO TO TVs over coax using a modulator
Send my PC VIDEO TO TVs over coax using a modulator
To send an HDMI video from a PC to the TV over coax using a VECOAX MODULATOR,
please make sure your PC video card is set to output a TV RESOLUTION as 720p(1280 * 720) or 1080i/p(1920 * 1080)
Right, Click on the Desktop and select Display settings for Windows.
Ensure that the Resolution is set to 1920 x 1080 for 1080P video or 1280 x 720 for 720P
In some cases, these resolutions are not supported by your PC so we recommend switching the display type under Multiple Displays from Duplicate to Extended these displays.
This will provide full control of the HDMI output resolution being fed to the Modulator.
Related Articles
No audio using a PC or Laptop as a Source
No audio using a PC or Laptop as a Source When using a laptop or PC as an HDMI source with our devices, it's required to set the PC or laptop's Audio output to the HDMI output from the laptop or PC. 1) Right-click on the sound volume icon in the ...Using Raspberry PI as an HDMI Source
Using Raspberry PI as an HDMI Source In order to use the Raspberry PI as s HDMI source sometimes it is required to perform the following on your raspberry PI: From shell prompt “sudo tvservice -d /boot/edid.dat” Then “cd /boot” Then “vi config.txt” ...Vecoax Ultra HDMI Plus
Vecoax Ultra HDMI Plus Manual PDF Attached below Subject to be updated or changed without notice. Any or all questions please open ticket here : https://provideoinstruments.zohodesk.com/portal/en/newticketVeCaster HEVC HD HDMI
VeCaster HEVC HD HDMI VeCaster HEVC HD HDMI MANUALVeCaster - H264 HDMI Manual
VeCaster - H264 HDMI Manual Vecaster Series